# Ooitech Solar Panel Laminator Cikakken Katalogin Samfura

> Cikakken katalogin Ooitech na laminator na hasken rana: samfura 10, kwatancen fasaha, bayanin tsarin, kula da aminci

#### Ooitech Solar Panel Laminator Cikakken Katalogin Samfura

Cikakken katalogin Ooitech na laminator na hasken rana: samfura 10, kwatancen fasaha, bayanin tsarin, kula da aminci

##### Hannun jari: Akwai | Lokacin kera kwanaki 30~60

##### Rukuni: Samfur

##### Tags:

---

---

**Amsa mai sauri:** Wannan shine cikakken kasidar injin laminator na Ooitech: samfura goma da suka haɗa da injuna na rabin-atomatik da cikakken atomatik, daga ɗakin gwaji na 600 mm da 600 mm har zuwa faranti na samarwa na 2600 mm da 1500 mm. Ya haɗa da ka'idar suna samfura, kwatancen ƙayyadaddun fasaha a duk injuna goma, ƙayyadaddun kowane ɗaya, bayanin tsarin gama gari, sarrafa aminci, manyan samfuran kayan aiki, buƙatun masana'anta da shigarwa, sharuɗɗan garanti da bayanan aiki. Girman ɗakin shine shawara ta farko, saboda yana ƙayyade adadin modules da ake lodawa lokaci ɗaya; na biyu shine ko ɗaki ɗaya ko biyu suka dace da zagayowar ku, tunda injin mai ɗaki biyu yana ci gaba da aikin famfunan vacuum yayin da ɗayan gefen ke lodawa. Daidaiton zafin jiki a kan farantin shine ƙayyadaddun da ke yanke shawarar ingancin laminate: kusurwa mai sanyi yana barin encapsulant da ba a dafa ba wanda ke gazawa shekaru bayan haka. Zaɓin man silicone da famfur vacuum ya dogara ne daga girman ɗakin da lokacin zagayowar da kuke buƙata.

PV Module Manufacturing · na Jerry, Ooitech

![Kalli bidiyon samfur](https://img.youtube.com/vi/yGUGkAZ0FDA/maxresdefault.jpg)

1. [Bayani da Aikace-aikacen Samfur](#overview)
2. [Tsarin Suna na Samfur](#model-naming)
3. [Teburin Kwatancen Bayanan Fasaha (Duk Samfura)](#comparison)
4. [Bayani Na Musamman Na Samfur](#models)
5. [Bayanin Tsarin Gama Gari](#systems)
6. [Kula da Tsaro](#safety)
7. [Abubuwan da ke ciki da Alamomi](#parts)
8. [Bukatun Masana'anta / Shigarwa](#factory)
9. [Garanti da Sabis na Bayan Siyarwa](#warranty)
10. [Bayanan Aiki da Tsaro (Cire daga Littafin Mai amfani)](#opnotes)

## 1. Bayanin Samfur da Aikace-aikace

Na'urar laminator na hasken rana ita ce mafi mahimmancin kayan aiki a layin samar da na'urorin hasken rana. Tana haɗa nau'ikan kayan da yawa — **EVA [encapsulant](https://www.ooitech.com/EVA-POE-EPE-Encapsulant-Film-for-Solar-Panel-Manufacturing-Complete-Technical-Guide.html), gilashin da aka yi da zafi, [backsheet](https://www.ooitech.com/Photovoltaic-Backsheet-The-Critical-Protective-Layer-for-Solar-Modules.html), da ƙwayoyin hasken rana** — tare ta hanyar haɗin zafi da vacuum a cikin wani ɗaki na lamination da aka rufe.

Ooitech tana ba da cikakken jerin laminators daga ƙananan nau'ikan tebur na atomatik zuwa manyan layukan samarwa na atomatik mai hawa biyu, ɗaki uku. Duk nau'ikan suna dacewa da:

- Na'urorin hasken rana na Mono-crystalline silicon
- Na'urorin hasken rana na Poly-crystalline silicon
- Na'urorin hasken rana na gilashi biyu (bifacial)
- [TOPCon](https://www.ooitech.com/what-is-topcon-solar-cell-a-complete-guide-to-tunnel-oxide-passivated-contact-technology.html), HJT da sauran fasahohin ƙwayoyin da suka ci gaba

## 2. Tsarin Suna na Samfur

| Harafin Lamba | Ma'ana |
| --- | --- |
| H | Semi-automatic |
| A | Daki guda |
| S | Daki biyu |
| T | Daki uku |
| B | Layi biyu (jeri) |
| D | Wutar lantarki (idan an yi amfani da shi azaman kari; "DD" = layi biyu daki biyu) |
| Lamba mai kari (misali 2787, 2658): yana wakiltar girman yankin lamination mai inganci (Nisa × Tsayi a mm, a takaice) |

## 3. Teburin Kwatanta Bayanan Fasaha — Duk Samfura

| Parameter | OCY-H600D | OCY-1111 | OTCY-2615 | OTCY-2446 | OTCY-2658(Guda) | OTCY-2666 | OTCY-2658(Biyu) | OTCY-2787D | OTCY-2787DD | OTCY-BT2787 |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| — Tsarin Asali — |
| Yanayin Aiki | Semi-Auto | Semi-Auto | Semi-Auto | Cikakken Auto | Atomatik | Atomatik | Cikakken Auto | Cikakken Auto | Cikakken Auto | Cikakken Auto |
| Tsarin Chamber | Guda | Guda | Guda | 1 Lam. | Guda | Guda | 1 Lam. + 1 Cur. | 1 Lam. + 1 Cur. | 2 Lam. + 2 Cur.(Biyu Layer) | 2 Lam. + 2 Cur. + 2 Cool.(Biyu Layer) |
| Yanayin Dumama | Lantarki | Lantarki | Lantarki | Man | Man | Man | Man | Man | Man | Man |
| — Girma & Ƙarfi — |
| Wurin Lamination (mm) | 600 × 600 | 1100 × 1100 | 2600 × 1500 | 4600 × 2400 | 2600 × 5800 | 2600 × 6600 | 5800 × 2600 | 8700 × 2700 | 8700 × 2700× 2 layers | 8700 × 2700× 2 layers |
| Tsayin Chamber Net (mm) | 35 | 35 | 35 | 35 | 35 | 35 | 35 | 35 | 40 | 40 |
| Girman Injin (m) | 1.1×1.1×1.0 | 1.5×2.0×1.4 | 3.1×2.5×1.4 | 14.98×3.4×1.8 | 18.5×3.58×1.8 | 21.1×3.58×1.8 | 21.3×3.58×1.8 | 37.3×3.68×1.8 | 37.3×4.88×3.4 | 47.2×4.9×3.4 |
| Nauyin Injin | 0.5 T | 2.3 T | 5 T | 16 T | 25 T | 25 T | — | — | 128 T | 170 T |
| — Wutar Lantarki — |
| Samar da Wutar Lantarki | AC 380V / 50Hz / 3-Phase 5-Wire (kowane samfuri) |
| Ƙarfin Wuta | 5 kW | 11.5 kW | 33 kW | 70 kW | 90 kW | 90 kW | 185 kW | 190 kW | 395 kW | 460 kW |
| Matsakaicin Ƙarfin Aiki | 1.5 kW | 3.5 kW | ≤8.5 kW | ≤30 kW | — | ≤45 kW | ≤95 kW | 95 kW | ≤190 kW | ≤220 kW |
| Ƙarfin Dumama | 3+1.2 kW | 8.5 kW | 27 kW | 54 kW | 90 kW | 72 kW | 72 kW × 2 | 72 kW × 2 | 72 kW × 4 | 72 kW × 2 (kowane Layer) |
| — Zazzabi — |
| Matsakaicin Zazzabi | 30–200°C | 30–200°C | 30–200°C | 30–180°C | 30–180°C | 30–180°C | 30–180°C | 30–180°C | 30–180°C | 30–180°C |
| Daidaiton Zazzabi | ±1°C | ±1°C | ±1°C | ±1°C | ±1°C | ±1°C | ±2°C | ±1°C | ±1°C | ±1°C |
| Daidaiton Zazzabi | ≤±2°C | ≤±2°C | ≤±2°C | ≤±2°C | ≤±1.5°C | ≤±2°C | ≤±1°C | ≤±2°C | ≤±2°C | ≤±1.5°C |
| Matsayin Kula da Zazzabi | — | — | — | 5 | 5 | 5 | 5 | 5 | Madaidaici a kowane ɗaki | 5 a kowane ɗaki |
| — Vacuum — |
| Matsayin Vacuum (aiki) | 40–100 Pa | 40–100 Pa | 40 Pa | 40–100 Pa | 40–100 Pa | 40 Pa | 40–100 Pa | 40–100 Pa | 40–100 Pa | 40–100 Pa (ult. 40 Pa) |
| Lokacin Vacuum (mai daidaitawa) | 5–30 min | 5–30 min | 5–30 min | 5–30 min | 5–30 min | 5–30 min | 5–30 min | 5–30 min | 5–30 min | 5–30 min |
| Famfon Vacuum | VRD-24 (24 m³/h) | 2X-30 (30 L/s) | 2X-30 | 2X-70 | 2X-70 + ZJP600 | 2X-70 + ZJP600 | 2X-70+ZJP600 / 2X-70 | 2X-70+ZJP600 / 2X-70 | 2×(2X-70+ZJP600) / 2×2X-70 | 2×2X-70+ZJP600 / 2×2X-70 / 2X-70 |
| — Samar da Iska — |
| Matsin Samar da Iska | 0.6 ~ 0.8 MPa (duk nau'ikan) |
| Gudun Iska Mai Matsi | ≥200 L/min | ≥300 L/min | ≥300 L/min | ≥400 L/min | ≥400 L/min | ≥600 L/min | ≥800 L/min | ≥800 L/min | ≥1000 L/min | ≥800 L/min × 6 |
| — Aiki — |
| Zagayen Aiki | Da Hannu | Da Hannu | Da Hannu | ≤18 min | ≤18 min | ≤18 min | ≤9 min | ≤9 min | ≤9 min | ≤9 min (kowane Layer) |
| Samuwa | — | — | — | 98% | — | — | — | — | — | ≥99% |
| Rayuwar Sabis | ≥ 10 shekaru (duk samfura) |
| Gudun Isarwa | — | — | — | 4–14 m/min | 4–14 m/min | 4–14 m/min | 4–14 m/min | 4–14 m/min | 4–14 m/min | 4–14 m/min |
| Lodawa / Saukewa | Da Hannu | Da Hannu | Da Hannu | Belt / SS rollers | Belt / SS rollers (buffer opt.) | Belt / SS rollers (buffer opt.) | Belt / SS rollers (buffer opt.) | Belt / SS rollers (buffer opt.) | Belt / SS rollers (buffer opt.) | Belt mai tari / SS rollers mai tari |
| Dandalin Aiki | Touch Screen + PLC (duk samfura) |
| Tsayin aiki (bude murfin) | — | — | — | 100–120 mm | 100–120 mm | 100–120 mm | 100–150 mm | 100–120 mm | 100–120 mm | 100–120 mm |
| Matsakaicin tsayin murfin (kula) | — | — | — | ≥250 mm | ≥250 mm | ≥250 mm | ≥250 mm | ≥250 mm | ≥250 mm | ≥250 mm |
| Yawan Iskar Iska | — | — | — | 0–50 L/s | 0–50 L/s | 0–50 L/s | 0–5 L/s | 0–70 L/s | 0–50 L/s | 0–50 L/s |

## 4. Ƙayyadaddun Samfurin Kowane

| Wurin Lamination | 600 × 600 mm | Yanayin Dumama | Wutar Lantarki (Gefe Biyu) |
| --- | --- | --- | --- |
| Ƙarfin Wuta | 5 kW | Matsakaicin Ƙarfin Aiki | 1.5 kW |
| Ƙarfin Dumama | 3 kW + 1.2 kW | Matsakaicin Zazzabi | 30°C – 200°C |
| Daidaiton Zazzabi | ±1°C | Daidaituwar Zazzabi | ≤±2°C |
| Matsayin Vacuum | 40–100 Pa | Lokacin Vacuum | 5–30 min (ana iya daidaitawa) |
| Famfon Vacuum | VRD-24 (24 m³/h) — Feiyue brand | Tsayin Chamber | 35 mm |
| Samar da Iska | 0.6–0.8 MPa | Gudun Iska Mai Matsi | ≥200 L/min |
| Zagayen Aiki | Da Hannu | Dandalin Aiki | Touch Screen + PLC |
| Girman Injin | 1100 × 1100 × 1000 mm | Nauyi | 0.5 T |
| Rayuwar Sabis | ≥10 shekaru |  |  |

*Lura: Lokacin dumama daga zazzabin daki zuwa 145°C: <60 mintuna. Lokacin vacuum don kaiwa 100Pa: <120 seconds.*

| Wurin Lamination | 1100 × 1100 mm | Yanayin Dumama | Wutar Lantarki |
| --- | --- | --- | --- |
| Ƙarfin Wuta | 11.5 kW | Matsakaicin Ƙarfin Aiki | 3.5 kW |
| Ƙarfin Dumama | 8.5 kW | Matsakaicin Zazzabi | 30°C – 200°C |
| Daidaiton Zazzabi | ±1°C | Daidaituwar Zazzabi | ≤±2°C |
| Matsayin Vacuum | 40–100 Pa | Lokacin Vacuum | 5–30 min (ana iya daidaitawa) |
| Famfon Vacuum | 2X-30 (30 L/s) — Sichuang Nanguang | Tsayin Chamber | 35 mm |
| Samar da Iska | 0.6–0.8 MPa | Gudun Iska Mai Matsi | ≥300 L/min |
| Zagayen Aiki | Da Hannu | Dandalin Aiki | Touch Screen + PLC |
| Girman Injin | 1500 × 2000 × 1400 mm | Nauyi | 2.3 T |
| Rayuwar Sabis | ≥10 shekaru |  |  |

*Lura: Lokacin dumama daga zafin daki zuwa 145°C: <50 mintuna. Lokacin vacuum don kaiwa 100Pa: <120 seconds.*

| Wurin Lamination | 2600 × 1500 mm | Yanayin Dumama | Dumama Lantarki |
| --- | --- | --- | --- |
| Ƙarfin Wuta | 33 kW | Matsakaicin Ƙarfin Aiki | ≤8.5 kW |
| Ƙarfin Dumama | 27 kW | Matsakaicin Zazzabi | 30°C – 200°C |
| Daidaiton Zazzabi | ±1°C | Daidaituwar Zazzabi | ≤±2°C |
| Matsayin Vacuum | 40 Pa | Lokacin Vacuum | 5–30 min (ana iya daidaitawa) |
| Famfon Vacuum | 2X-30 | Tsayin Chamber | 35 mm |
| Samar da Iska | 0.6–0.8 MPa | Gudun Iska Mai Matsi | ≥300 L/min |
| Zagayen Aiki | Da Hannu | Dandalin Aiki | Touch Screen + PLC |
| Girman Injin / Nauyi | 3.1 × 2.5 × 1.4 m / 5 T |
| Rayuwar Sabis | ≥10 shekaru |  |  |

*Dumama lantarki tare da sarrafa module don inganta daidaiton zafin jiki. Dumama zuwa 145°C: <50 mintuna. Vacuum zuwa 100Pa: <120 seconds.*

| Wurin Lamination | 4600 × 2400 mm | Yanayin Dumama | Dumama Mai |
| --- | --- | --- | --- |
| Ƙarfin Wuta | 70 kW | Matsakaicin Ƙarfin Aiki | ≤30 kW |
| Ƙarfin Dumama | 54 kW | Matsakaicin Zazzabi | 30°C – 180°C |
| Daidaiton Zazzabi | ±1°C | Daidaituwar Zazzabi | ≤±2°C |
| Matsayin Kula da Zazzabi | ≥5 | Tsayin Chamber | 35 mm |
| Matsayin Vacuum | 40–100 Pa | Lokacin Vacuum | 5–30 min |
| Famfon Vacuum | 2X-70 (+ ZPJ300 Roots — buƙatar mai amfani) | Yawan Iskar Iska | 0–50 L/s |
| Samar da Iska | 0.6–0.8 MPa | Gudun Iska Mai Matsi | ≥400 L/min |
| Zagayen Aiki | ≤18 min | Samuwa | 98% |
| Tsarin Chamber | Chamber Lamination 1 | Lodawa / Saukewa | Loda bel / Fitar da roller SS |
| Dandalin Aiki | Touch Screen + PLC (Siemens) | Gudun Isarwa | 4–14 m/min |
| Girman Injin / Nauyi | 14.98 × 3.4 × 1.8 m / 16 T |
| Rayuwar Sabis | ≥10 shekaru |  |  |

| Wurin Lamination | 2600 × 5800 mm | Yanayin Dumama | Dumama Mai |
| --- | --- | --- | --- |
| Ƙarfin Wuta | 90 kW | Daidaituwar Zazzabi | ≤±1.5°C |
| Daidaiton Zazzabi | ±1°C | Matsakaicin Zazzabi | 30°C – 180°C |
| Matsayin Kula da Zazzabi | ≥5 | Tsayin Chamber | 35 mm |
| Matsayin Vacuum | 40–100 Pa (ult.<40 Pa) | Lokacin Vacuum | 5–30 min (adj.) |
| Famfon Vacuum | 2X-70 + ZJP600 Roots | Yawan Iskar Iska | 0–50 L/s |
| Samar da Iska | 0.6–0.8 MPa | Gudun Iska Mai Matsi | ≥400 L/min |
| Matsakaicin Fitarwa | ≥600 m³/h (100Pa a <90s) | Zagayen Aiki | ≤18 min |
| Tsarin Chamber | Gida Guda | Lodawa / Saukewa | Belt / SS rollers (buffer optional) |
| Dandalin Aiki | Touch Screen + PLC (Siemens) | Gudun Isarwa | 4–14 m/min |
| Girman Injin / Nauyi | 18.5 × 3.58 × 1.8 m / 25 T |
| Rayuwar Sabis | ≥10 shekaru |  |  |

| Wurin Lamination | 2600 × 6600 mm | Yanayin Dumama | Dumama Mai |
| --- | --- | --- | --- |
| Ƙarfin Wuta | 90 kW | Matsakaicin Ƙarfin Aiki | ≤45 kW |
| Ƙarfin Dumama | 72 kW | Matsakaicin Zazzabi | 30°C – 180°C |
| Daidaiton Zazzabi | ±1°C | Daidaituwar Zazzabi | ≤±2°C |
| Matsayin Kula da Zazzabi | ≥5 | Tsayin Chamber | 35 mm |
| Matsayin Vacuum | 40 Pa | Lokacin Vacuum | 5–30 min (adj.) |
| Famfon Vacuum | 2X-70 + ZJP600 Roots | Yawan Iskar Iska | 0–50 L/s |
| Samar da Iska | 0.6–0.8 MPa | Gudun Iska Mai Matsi | ≥600 L/min |
| Matsakaicin Fitarwa | ≥600 m³/h (100Pa a <90s) | Zagayen Aiki | ≤18 min |
| Tsarin Chamber | Gida Guda | Lodawa / Saukewa | Belt / SS rollers (buffer optional) |
| Dandalin Aiki | Touch Screen + PLC (Siemens) | Gudun Isarwa | 4–14 m/min |
| Girman Injin / Nauyi | 21.1 × 3.58 × 1.8 m / 25 T |
| Rayuwar Sabis | ≥10 shekaru |  |  |

| Wurin Lamination | 5800 × 2600 mm (Gida biyu) | Yanayin Dumama | Dumama Mai |
| --- | --- | --- | --- |
| Ƙarfin Wuta | 185 kW | Matsakaicin Ƙarfin Aiki | ≤95 kW |
| Ƙarfin Dumama | 72 kW × 2 | Matsakaicin Zazzabi | 30°C – 180°C |
| Daidaiton Zazzabi | ±2°C | Daidaituwar Zazzabi | ≤±1°C |
| Matsayin Kula da Zazzabi | 5 | Tsayin Chamber | 35 mm |
| Matsayin Vacuum | 40–100 Pa | Lokacin Vacuum | 5–30 min |
| Famfunan Vacuum (Lam.) | 2X-70 + ZJP600 Roots | Famfunan Vacuum (Cur.) | 2X-70 |
| Yawan Iskar Iska | 0–5 L/s | Matsakaicin Fitarwa | <90s zuwa 100Pa |
| Samar da Iska | 0.6–0.8 MPa | Gudun Iska Mai Matsi | ≥800 L/min |
| Zagayen Aiki | ≤9 min | Tsarin Chamber | 1 Lamination + 1 Curing |
| Lodawa / Saukewa | Belt / SS rollers (buffer optional) | Gudun Isarwa | 4–14 m/min |
| Dandalin Aiki | Touch Screen + PLC (Siemens) | Tsayin Murfin Curing | 120–150 mm (aiki); ≥250 mm (gyara) |
| Girman Injin | 21.3 × 3.58 × 1.8 m |
| Rayuwar Sabis | ≥10 shekaru |  |  |

| Wurin Lamination | 8700 × 2700 mm | Yanayin Dumama | Dumama Mai |
| --- | --- | --- | --- |
| Ƙarfin Wuta | 190 kW | Matsakaicin Ƙarfin Aiki | 95 kW |
| Ƙarfin Dumama | 72 kW × 2 | Matsakaicin Zazzabi | 30°C – 180°C |
| Daidaiton Zazzabi | ±1°C | Daidaituwar Zazzabi | ≤±2°C |
| Matsayin Kula da Zazzabi | 5 | Tsayin Chamber | 35 mm |
| Matsayin Vacuum | 40–100 Pa (ult. 40 Pa) | Lokacin Vacuum | 5–30 min |
| Famfunan Vacuum (Lam.) | 2X-70 + ZJP600 Roots; saurin famfo ≥630 m³/h (100Pa a <90s) | Famfunan Vacuum (Cur.) | 2X-70 rotary vane; ≥70 L/s |
| Yawan Iskar Iska | 0–70 L/s | Bawul ɗin Hawa | SMC VXZ260KG (matsi daban sifili, bawul solenoid mai hanyoyi biyu) |
| Samar da Iska | 0.6–0.8 MPa | Gudun Iska Mai Matsi | ≥800 L/min |
| Zagayen Aiki | ≤9 min | Tsarin Chamber | 1 Lamination + 1 Curing |
| Lodawa / Saukewa | Belt / SS rollers (buffer optional) | Gudun Isarwa | 4–14 m/min |
| Dandalin Aiki | Allon Taɓawa + PLC (Siemens/Kunlun) | Mahimman Na'urorin Hawa | SMC na Japan |
| Girman Injin | 37.3 × 3.68 × 1.8 m |
| Rayuwar Sabis | ≥10 shekaru |  |  |

| Wurin Lamination | 8700 × 2700 mm × 2 layers | Yanayin Dumama | Dumama Mai |
| --- | --- | --- | --- |
| Ƙarfin Wuta | 395 kW | Matsakaicin Ƙarfin Aiki | ≤190 kW |
| Ƙarfin Dumama | 72 kW × 4 | Matsakaicin Zazzabi | 30°C – 180°C |
| Daidaiton Zazzabi | ±1°C | Daidaituwar Zazzabi | ≤±2°C |
| Wurin Kula da Zazzabi | Madaidaici a kowane ɗaki | Tsayin Chamber | 40 mm |
| Matsayin Vacuum | 40–100 Pa | Lokacin Vacuum | 5–30 min |
| Famfon Vacuum | 2× (2X-70 + ZJP600) Roots (lam.) / 2× (2X-70) rotary (cur.) | Matsakaicin Fitarwa | ≥630 m³/h (lam., 100Pa<90s) |
| Yawan Iskar Iska | 0–50 L/s | Samar da Iska | 0.6–0.8 MPa |
| Gudun Iska Mai Matsi | ≥1000 L/min | Zagayen Aiki | ≤9 min |
| Tsarin Chamber | 2 Lamination + 2 Curing (Biyu Layer) | Lodawa / Saukewa | Belt / SS rollers (buffer optional) |
| Dandalin Aiki | Touch Screen + PLC | Gudun Isarwa | 4–14 m/min |
| Girman Injin / Nauyi | 37.3 × 4.88 × 3.4 m / 128 T (Ƙarfin ƙasa: 3.0 T/m²) |
| Rayuwar Sabis | ≥10 shekaru |  |  |

#### Bukatun Masana'anta (OTCY-2787DD)

| Abu | Parameter |
| --- | --- |
| Samar da Wutar Lantarki | 380V/50Hz, 3-phase 5-wire. Peak: 395 kW; Operating: 190 kW |
| Iskar Matsi | Pressure: 0.8 MPa (min 0.6 MPa); Peak flow: 1000 L/min; Operating flow: 600 L/min; Interface: Φ16 mm × 2 |
| Ruwan Sanyaya | Zazzabi na yau da kullun (don famfo na vacuum) |
| Bukatar Fitar da Hayaki | Temperature<180°C; Flow: 30 m³/h |
| Daki Mai Tsabta | ISO Class 5 |
| Daidaituwar Kasa | ±10 mm |
| Kwantar da AC | 25 ± 5°C |

| Cikakken Suna | Double Layer Triple Chamber Oil Heating Solar PV Module Laminator |
| --- | --- |
| Wurin Lamination | 2700 × 8700 mm × 2 layers | Rarraba Chamber | Biyu Layer Uku Chamber (Lam×2 + Cur×2 + Cool×2) |
| Ƙarfin Wuta | 460 kW (standard) | Matsakaicin Ƙarfin Aiki | ≤220 kW |
| Ƙarfin Dumama | 72 kW × 2 (kowane Layer) | Matsakaicin Zafi | SD320 Thermal Oil |
| Matsakaicin Zazzabi | 30°C – 180°C | Daidaituwar Zazzabi | ≤±1.5°C |
| Daidaiton Zazzabi | ±1°C | Sarrafa Zazzabi | PID mai daidaita kai da hankali (maki 5 a kowane ɗaki) |
| Tsayin Chamber | 40 mm (lam.); murfin aiki: 100–120 mm; max: ≥250 mm | Yawan Iskar Iska | 0–50 L/s |
| Matsayin Vacuum (aiki) | 40–100 Pa | Vacuum na Ƙarshe | 40 Pa |
| Lokacin Vacuum | 5–30 min (ana iya daidaitawa) | Famfon Vacuum | Mataki I: 2×2X-70 + ZJP600 (lam.); Mataki II: 2×2X-70 (cur.); Mataki III: 2X-70 (cool.) |
| Samar da Iska | 0.6–0.8 MPa | Gudun Iska Mai Matsi | ≥800 L/min × 6 |
| Zagayen Aiki | ≤9 min (kowane Layer) | Samuwa | ≥99% |
| Nauyin Injin | 170 T | Nauyin Bearing na Conveyor | ≤300 kg |
| Rayuwar Farantin Gel na Silicone | ≥3000 amfani | Gudun Isarwa | 4–14 m/min |
| Dandalin Aiki | Allon Taɓawa Mai Zaman Kanta Biyu | Lodawa / Saukewa | Loda Belt Mai Tari + Sauke Roller Mai Tari |
| Tsayin Haɗin Layin Samarwa | Ƙasa: 950 ± 30 mm; Sama: 2630 ± 30 mm |
| Girman Iyaka | 47.2 × 4.9 × 3.4 m (haɗe da dandalin kula da bene na 2) |
| Girman Injin Mai Gida | 30.5 m (L) × 3.7 m (W) × 3.4 m (H) |
| Dandalin Kula da Bene na 2 | Faɗi: 600 mm; Tsayi: 1800 mm; Tsayin shinge: 900 mm |
| Rayuwar Sabis | ≥10 shekaru |  |  |

#### Takaitaccen Tsari

- Tsarin Rukunin: Matakin lodawa ×2, Matakin sarrafawa I ×2 (Laminating), Matakin sarrafawa II ×2 (Ƙarfafawa), Matakin sanyaya ×2, Matakin sauke kaya ×2
- Kayan aikin vacuum: Goma na'urorin famfo na rotary vane 2X-70, biyu na'urorin famfo na ZJP600 Roots
- Dumama: Hudu na'urorin dumama 72 kW (man thermal SD320)
- Kowane ɗakin laminating mai zaman kansa; kowane Layer na iya aiwatar da lamination daban
- Tsarin zane-zane na sama da ƙasa masu zafi tare da na'urorin goge baki don kawar da ragowar
- Dandamali na kulawa na musamman tare da tsani don shiga bene na 2 (faɗin 600 mm, tsayi 1800 mm, shingen tsaro 900 mm)

#### Matakin Sanyaya (na musamman ga BT2787)

- Irin tsarin gini da matakin sarrafawa, amma an saka shi da injin sanyaya masana'antu don sanyaya ruwa na modules da ke fitowa daga ɗakunan sarrafawa
- Farantin gindi na sanyaya: Karfe Q235, kauri 40 mm, saman da aka niƙa sosai; ramukan ciki suna ba da damar kwararar mai sanyaya
- Wuraren auna zafin jiki akan farantin gindi: ≥5, nunin lokaci-lokaci
- Famfon vacuum na matakin sanyaya: famfon rotary vane, ≥70 L/s; 100 Pa a cikin <90s

## 5. Bayanin Tsarin Gama-gari

Wadannan bayanin sun shafi dukkan nau'ikan masu dumama mai cikakken atomatik (OTCY-2446, 2658, 2666, 2787D, 2787DD, BT2787). Nau'ikan lantarki masu rabin atomatik suna da tsarin sarrafawa da aminci iri daya amma suna da tsarin injiniya mai sauki.

### 5.1 Tsarin Ciyarwa

- Matakin ciyarwa yana amfani da **bel mai hana karkata** don canja wurin kayayyaki zuwa babban na'urar laminating daidai.
- Ana sarrafa shi ta **tsarin canza mitar + tsarin gano hoto + tsarin hana kuskure na encoder**. Gudun watsawa yana iya daidaitawa akai-akai daga **4 zuwa 14 m/min**.
- Akwai hanyoyin aiki guda uku: **Ciyarwa ta atomatik, Ciyarwa da hannu, da Gudanar da gaggawa** (ta hanyar maɓallin motsi na watsawa).
- Na'urar gano hoto a ƙarshen bel ɗin watsawa yana ba da kariya da gano wuri ga kayayyaki. Idan an gano karkacewar wuri, kayayyaki ba za su iya shiga sashin lamination ba (an kunna ƙararrawa).
- Samfuran Layer Biyu (BT2787, 2787DD) suna amfani da **dandamalin lodin bel mai tari** — kowane Layer yana da nasa na'urar lodin mai zaman kanta.

### 5.2 Sashen Laminating / Curing

- **Tsarin ɗaki:** Kowane ɗakin laminating ya ƙunshi ɗaki na sama (akwatin sama) da farantin dumama na ƙasa, wanda aka raba ta farantin gel silica tare da katako mai rufewa / firam ɗin matsi, yana samar da ƙananan ɗakuna biyu masu zaman kansu (sama da ƙasa).
- **Farantin dumama:** An yi shi da farantin karfe Q235 mai kauri 60 mm. An gama saman ta hanyar niƙa mai kyau; rashin daidaituwa na saman ≤200 µm/m². Tsarin bututu mai shiga biyu da fita biyu don mai mai zafi.
- **Matsakaicin dumama:** Ba kasa da 1.5°C/minti.
- **Bambancin zafin jiki:** ≤±2°C (misali); ≤±1.5°C (samfuran masu daraja).
- **Auna zafin jiki:** ≥5 maki a kowane farantin dumama, ana nunawa a ainihin lokaci akan allon taɓawa.
- Kowane ƙaramin ɗaki na iya zama **mai zaman kansa a huta da kuma cika iska**. An saita kuma ana sarrafa darajar vacuum — yana goyan bayan bayanan lamination da aka raba / mataki. Na'urar matsa lamba ta SMC tana lura da matsa lamba na ainihi; ana shigar da ma'aunin vacuum na Pa-class a cikin ƙaramin ɗaki.
- **Famfon vacuum na sashin lamination:** 2X-70 rotary vane + ZJP600 Roots famfo saiti. Gudun famfo ≥630 m³/h (OTCY-2787D/DD) ko ≥600 m³/h (2658/2666). Lokaci zuwa 100 Pa:<90 seconds.
- **Famfon vacuum na sashin curing:** 2X-70 rotary vane famfo. Gudun famfo ≥70 L/s. Lokaci zuwa 100 Pa:<90 seconds.
- **Ɗaga murfin:** Tsayin buɗe aiki 100–120 mm; tsayin buɗe ƙarshe (kula) ≥250 mm.
- **Daidaiton matsayi:** Gear motor + frequency control + encoder tsarin. Maimaita daidaiton matsayi a cikin ±10 mm.
- Belts na sama da na ƙasa na babban na'urar lamination suna sanye da **roller brush cleaners** don cire ragowar EVA/film daga zanen zafi mai zafi.
- Farantin dumama yana sanye da **na'urar busawa ta musamman** (akan nau'ikan 2658/2666) don hana zanen zafi mai zafi manne wa farantin.

### 5.3 Sashen Saukewa / Fitarwa

- Ana fitarwa ta hanyar **rollers na bakin karfe** wanda tsarin canza mitar ke tafiyar da shi, ana iya daidaita gudun don dacewa da ciyarwa da gudun injin.
- Zaɓi: **sauke roller na bakin karfe irin na buffer**.
- Na'urori masu gane haske a gaba da baya suna lura da fitarwa a lokaci guda don hana faɗuwar kayayyaki.
- Sashen fitarwa ya ƙunshi **aikin sanyaya da fan** — fan suna kunna ta atomatik lokacin da aka fitar da kayayyaki don hanzarta sanyaya.
- Nau'ikan bene biyu (BT2787, 2787DD) suna amfani da **masu jigilar roller da yawa da aka jera** tare da na'urorin sanyaya iska don hanzarta sanyaya kayayyaki.

### 5.4 Tsarin Watsawa

- Watsawar injin: **Motar gear + sarrafa mitar + sarrafa encoder**, tuki mai zafi ta sarkar. Maimaita daidaiton matsayi: ±10 mm.
- Matakan ciyarwa da fitarwa: Motar gear + sarrafa saurin mitar don daidaita da saurin babban injin.
- An shirya tuki mai zafi a cikin **motsi madauwari mai girma** — tukuna da yawa an haɗa su a jere, suna ci gaba da zagayawa ba tare da katsewa ba a duk tsawon tsarin watsawa. Wuraren haɗin/hadar tukuna na sama da ƙasa ba sa taɓa saman module.
- **Zane na gear mai aiki tare** yana tabbatar da tsarin tuki mai zafi na sama da ƙasa koyaushe suna motsawa tare.
- **Zane na taurare sarkar + na'urar hana tsalle gear** yana rage sassauƙar sarkar daga lalacewa, yana tabbatar da watsawa mai santsi, ci gaba ba tare da karyewar sarkar ko tsalle ba.

### 5.5 Tsarin Dagawa

- Dukkan matakan laminating da curing suna amfani da **dagawa ta iska**, wanda ake sarrafa ta hanyar bawuloli na solenoid mai hanyoyi uku da matsayi biyar.
- Mahimman abubuwan pneumatic (silinda, bawuloli na solenoid na ɗagawa, bawuloli na solenoid na pneumatic) suna amfani da **SMC na Japan** (ko daidai) nau'ikan kayan aikin suna.
- Kowace silinda tana da bawuloli na **sharar da iska** don daidaita saurin ɗagawa, tabbatar da motsin silinda mai tsayayye da aiki tare.
- **Tsarin kula da iska mai zaman kansa:** Wani keɓaɓɓen da'irar aminci ta iska — daban da babban injin ɗagawa — yana ba da siginar riƙewa ga kowace silinda. Wannan yana hana ɗakin sama faɗuwa saboda katsewar wutar lantarki, fashewar bututu, ko wasu dalilai marasa al'ada.
- Samfurin 2787DD mai hawa biyu: Yana amfani da **tsarin ɗagawa na pneumatic mai ginshiƙai 8** shiri a kowane daki don kwanciyar hankali a kan babban dandamali.

### 5.6 Tsarin Dumama (Samfuran Dumama Mai)

- Ana dumama farantin dumama ta hanyar **mai mai ɗaukar zafi** wanda ke zagayawa ta cikin faranti mai ramuka. **Mai shiga biyu da mai fita biyu** tsarin bututun don rarraba zafin jiki daidai.
- **Matsakaicin dumama:** ≥1.5°C/minti.
- **Bambancin zafin jiki:** ≤±2°C (daidaitaccen); ≤±1.5°C (BT2787, 2658 gida ɗaya).
- Sarrafa zafin jiki mai maki da yawa tare da **fasahar daidaita kai ta PID** (tsarin zafin jiki na yau da kullun). Yana samar da daidaiton zafin jiki mai kyau.
- Tashar dumama daga masana'anta masu cancanta: tana ba da **saka idanu na ainihi kan zafin jiki da matsi**, tare da faɗakarwa ta atomatik da kashewa idan zafin jiki ya wuce ko matsi ya wuce.
- BT2787 yana amfani da **man zafi SD320** tare da tashoshin dumama guda huɗu na 72 kW.
- Faɗakarwar zafin jiki na tankin mai: injin yana tsayawa kuma yana faɗakarwa idan zafin mai ya wuce 180°C.
- **Hanyar aiki:** Bada damar famfon mai ya yi aiki a cikin zagayawa na yau da kullun na akalla mintuna 3 kafin kunna dumama. Lokacin kashewa: fara kashe dumama, sannan kashe famfon mai. KADA KA kashe famfon mai mai zafi idan zafin jiki ya wuce 100°C.

### 5.7 Tsarin Vacuum

- Vacuum na ɗakin lamination ana sarrafa shi ta hanyar **babban-vacuum butterfly valve** (Saitin famfo Roots).
- A ƙarƙashin yanayin zafin aiki, vacuum na ƙarshe na ɗakin lamination zai iya kaiwa **ƙasa da 40 Pa**. A yanayin aiki ta atomatik, vacuum na ɗakin lamination ≤100 Pa.
- Kowane ɗaki yana da **SMC na Japan zero differential pressure pneumatic membrane two-way solenoid valve (VXZ260KG)** don cika vacuum chamber. Matsakaicin cikawa ana iya daidaita shi daga 0–50 L/s (ko 0–70 L/s akan OTCY-2787D).
- Kowane ɗaki yana da **SMC pressure sensor** don saka idanu kan matsa lamba na ɗaki a lokaci guda. Allon taɓawa yana nuna matsa lamba kai tsaye. Ƙarƙashin ɗaki an ƙara sanye shi da ma'aunin vacuum na Pa-class.
- Dukkan tsarin vacuum/pneumatic an sanye shi da **tsarin aiki na hannu na backup** don aiwatar da iska da kuma fitar da iska a lokacin katsewar wutar lantarki ba zato ba tsammani, don rage asarar da ke faruwa daga yanayin kuskure.

### 5.8 Tsarin Sarrafawa

- Dukkan kayan aiki ana sarrafa su ta **PLC (Siemens) + Allon Taɓawa (Kunlun Tongtai)**.
- **Ajiye girke-girke da yawa:** Ana iya adana girke-girke (formulas) daban-daban na tsari kuma a kira su a kowane lokaci, don ɗaukar masana'anta daban-daban da kayan aiki.
- **Tsayar da bayanai:** Ana tuna sigogin tsari da bayanan saiti ta atomatik kuma ana adana su a kowane zagayowar wutar lantarki — ba asarar saituna.
- **Ƙididdigar adadin lamination:** Yana rikodin adadin samarwa a kowane shif don tsarawa, kula da gyara, da bin diddigin maye gurbin kayan amfani.
- **Haɗin MES:** Tsarin sarrafa tsarin samarwa na zaɓi (MES) yana samuwa bisa buƙatar mai amfani.
- Hanyoyin samarwa guda uku da mai aiki zai iya zaɓar: **Hannu, Semi-atomatik, da Atomatik**. Idan wani abu mara kyau ya faru yayin aiki ta atomatik, na'urar na iya canzawa zuwa yanayin hannu don rage asara.
- Ana tallafawa lamination mataki uku; ana saita ƙimar vacuum da matsa lamba da sarrafa su kowane mataki.
- Abubuwan lantarki na manyan alamu: aiki mafi kyau, ingantaccen inganci, ƙarancin maye gurbin.
- Kayan aiki na wayoyi, bututu, da kayan shigarwa sun dace da **ka'idojin ƙasa da ƙa'idodi masu dacewa**.
- BT2787 yana da **allon taɓawa mai zaman kansa biyu** (ɗaya kowane Layer) don sarrafa kowane Layer na samarwa lokaci guda.

## 6. Sarrafa Tsaro

### 6.1 Ayyukan Ƙararrawa & Kariya (Samfuran Mai Zafi)

| Abu | Bayanin Ƙararrawa / Sarrafa |
| --- | --- |
| Matsayin Module na Laminate | Idan modules suna waje da kewayon daidaitawa, ana hana lamination kuma ana kunna ƙararrawa. |
| Matsayi Mai Girma/Ƙarƙashin Tashar Zafi | Na'urar gano matakin mai mai zaman kanta tana lura da matakin mai akai-akai. Ana kunna ƙararrawa idan matakin ya fita daga iyaka. |
| Zafin Tankin Mai Ya Yi Yawa | Idan zafin mai mai zafi ya wuce 180°C, injin yana tsayawa kuma ana kunna ƙararrawa. |
| Zafin Farantin Dumama Ya Yi Yawa | An saita iyakar zafin mafi girma da mafi ƙanƙanta don farantin dumama. Ana kunna ƙararrawa idan zafin ya wuce iyakar da aka saita. |
| Gano Matsin Mai | Ana kunna ƙararrawa idan matsin mai ya wuce ƙimar da aka saita. |
| Gano Matsin Tushen Iska | Ana kunna ƙararrawa idan matsin iska mai matsa lamba ya wuce iyakar da aka saita. |
| Ƙararrawar Vacuum | Ana kunna ƙararrawa idan matakin vacuum ya kasa kaiwa ƙimar da aka saita a cikin lokacin da aka kayyade. |
| Kariyar Nauyin Famfon Mai | Injin yana yin ƙararrawa idan famfon mai ya yi nauyi fiye da kima. |
| Kariyar Famfon Vacuum | Yana lura da yanayin aikin famfon vacuum kuma yana kunna ƙararrawa idan ya gaza. |

### 6.2 Ayyukan Ƙararrawa da Kariya (Samfuran Wutar Lantarki / Semi-Auto)

| Abu | Bayanin Ƙararrawa / Sarrafa |
| --- | --- |
| Zafin Farantin Dumama Ya Yi Yawa | An saita iyakar zafi mafi girma da mafi ƙanƙanta. Ƙararrawa idan zafin ya wuce ƙimar da aka saita. |
| Gano Matsin Tushen Iska | Ƙararrawa idan matsin iska ya wuce ƙimar da aka saita. |
| Ƙararrawar Vacuum | Ƙararrawa idan matsin vacuum ya kasa kaiwa ga ƙimar da aka saita a cikin lokacin da aka kayyade. |
| Kariyar Famfon Vacuum | Yana lura da yanayin aikin famfon vacuum; yana ƙararrawa idan ya lalace. |
| Kariyar Wutar Lantarki ta Dumama | Yana lura da kuma kare wutar lantarki ta dumama; yana ƙararrawa idan wutar ta wuce ko ta yi nauyi. |
| Tsarin Buɗe/Rufe Murfi | A yanayin atomatik, idan ba a cika umarnin murfin da aka kayyade ba a cikin lokacin da aka saita, tsarin yana ƙararrawa. |
| Aikin Rikodin Ƙararrawa | Yana rikodin lokacin ƙararrawa da lokacin sokewa daidai. Har zuwa bayanan aiki 100 tare da ikon fitarwa/ajiya. |

### 6.3 Tsaron Hana Faɗuwa (Duk Samfura)

- Matakan tsaro biyu: **bawul ɗin sarrafa iska mai jagora + kulle inji**. Murfin sama ba zai faɗi ba idan na'urar ta yi kashe ba zato ba tsammani ko kuma bututun ya lalace, yana hana gazawar lamination da raunin ma'aikata.
- Wani **tsarin kula da iska mai zaman kansa** yana hana ɗakin sama faɗuwa saboda gazawar wutar lantarki ko fashewar bututu.

### 6.4 Sauran Fasalolin Tsaro

- Alamun gargaɗin tsaro a duk sassan da suka dace.
- **Fitilu masu launi uku da tsarin ƙararrawa** don sa ido kan yanayin aiki na na'urar a lokaci guda.
- **Kariyar kalmar sirri ta tsari:** Canza sigogin tsari yana buƙatar shigar da kalmar sirri mai izini.
- **Alamar vacuum:** Idan aka kashe wutar lantarki ba zato ba tsammani, za a iya tantance yanayin lamination kuma a ɗauki matakin da ya dace.
- **Matakan rufewa:** Duk bututu da sassan dumama an rufe su da zafi don rage amfani da makamashi da asarar zafin jiki.
- **Maɓallin dakatar da gaggawa:** Yana kashe dukkan na'urar idan an danna shi. Sake kunnawa ta hanyar juya shi zuwa inda kibiya take akan maɓallin.
- Bututun vacuum tsakanin famfon vacuum da laminator bai kamata ya wuce mita 12 ba don kiyaye aikin vacuum.
- Kafin bude murfin, tabbatar da cewa an cika ƙaramin ɗaki da iska zuwa yanayi. Bude murfin yayin da matsi mara kyau yana nan haramun ne.

## 7. Muhimman Abubuwa & Alamomi

| Bangare | Alama (Samfuran Mai Cikakken Aiki) | Alama (Samfuran Lantarki Mai Rabin Aiki) |
| --- | --- | --- |
| PLC | Siemens | Siemens |
| Allon Taɓawa | Kunlun Tongtai | Kunlun Tongtai |
| Mai Kashe Wuta | Schneider | Schneider |
| Mai Haɗa AC | Schneider | Schneider |
| Mai Gudanar da Ƙarfi | Zinariya | Zinariya |
| Silinda ta Iska | SMC na Japan | AirTAC |
| Mai Tacewa da Daidaita | SMC | AirTAC |
| Mai Jin Matsi | SMC | SMC |
| Bawul ɗin Hura (Solenoid) | SMC VXZ260KG | SMC |
| Bawul ɗin Butterfly na Vacuum | Shanhai Biaorui (high-vacuum) | Shanhai Biaorui / China Shanhai |
| Bawul ɗin Butterfly (ƙananan samfura) | — | FLOWX (OCY-H600D) |
| Famfon Vacuum | Sichuang Nanguang (2X-70) | Sichuang Nanguang / Feiyue |
| Tufa mai Zafin Zafi | Jiangsu | Jiangsu |
| Takardar Membrane Silicone | Shandong / Jiangsu | Shandong / Jiangsu |

## 8. Bukatun Masana'anta / Shigarwa (Gabaɗaya)

| Bukata | Ƙayyadaddun Bayanai |
| --- | --- |
| Zazzabi na Yanayi | 0°C – 45°C |
| Danshin Dangi | < 75% |
| Layin Wutar Lantarki | AC380V ±5%, 3-phase 5-wire. Don nisa <50 m tare da kyakkyawan zubar da zafi, kebul ɗin tagulla 50 mm² (3+2) GB guda ɗaya a kowace wutar lantarki ya isa. Ƙara diamita na waya yadda ya dace don dogon tazara. |
| Mahaɗin Tushen Iska | Bututun PU 12 mm. Matsin iska: 0.6–0.8 MPa (min 0.6 MPa a kowace DIN ISO 8573-1). Gudun ruwa: bisa ga ƙayyadaddun samfur (duba teburin kwatanta) |
| Ruwan Sanyaya (fanfon vacuum) | Ruwan sanyaya masana'antu na zagaye bisa ga GB50050-2007. Gudun: 600 L/h (famfo 2X-70) + 960 L/h (famfo Roots). Mahadar: 1/2″ (famfo 2X-70). Abokin ciniki ya samar da famfo mai shayarwa idan an buƙata. |
| Matsayin Daki Mai Tsabta | ISO Class 5 (don nau'ikan atomatik masu girma) |
| Daidaituwar Kasa | ±10 mm |
| Kwantar da iska | 25 ± 5°C (ana ba da shawarar bita mai sarrafa zafin jiki) |
| Ƙarfin Ƙasa | Bisa nauyin samfurin (duba bayanan kowane). OTCY-2787DD: 3.0 T/m² |

## 9. Garanti & Sabis Bayan Siyayya

- **Lokacin Garanti:** Shekara ɗaya bayan shigarwa mai nasara, ko watanni 16 daga ranar takardar jigilar kaya — duk wanda ya fara.
- **Abubuwan da Garanti Ya Ƙunshi:** A lokacin garanti, mai siyarwa yana ba da sabis na kulawa akan lokaci da kayan gyara masu mahimmanci kyauta (ban da abubuwan da ake amfani da su). Kudin jigilar kayan gyara nauyin abokin ciniki ne.
- **Taimako a Wurin Aiki:** Idan injiniyoyin mai siye ba za su iya magance wata matsala ba a lokacin garanti, mai siyar zai tura injiniyoyi zuwa masana'antar mai siye. Kudin jirgin sama na tafi da dawowa, sufuri na gida, masauki, da abinci a garin mai siye, mai siye ne zai biya.
- **Abubuwan da Garanti Ya Ƙi:** Lalacewa ko rashin aiki da ya taso daga rashin amfani, amfani da wuce gona da iri, rushewa da kai ko gyara ta wani banda ma'aikatan mai siyar da aka ba da izini, ko amfani da bai dace da littafin aiki ba.
- **Taimako Bayan Garanti:** Mai siyar yana ci gaba da ba da sabis na kan layi kyauta da jagorar fasaha har abada bayan lokacin garanti. Ana ba da kayan gyara ga mai siye a farashi masu kyau. Ziyarar injiniya a wurin bayan garanti: mai siye ne zai biya kudin jirgin sama, biza, masauki, kudin tafiya, da kudin aiki bisa ga ka'idojin mai siyar.
- **Abubuwan Amfani:** Ana bayarwa bayan an biya kuɗi a kowane lokaci (ba a rufe su da garanti ba).
- **Horar da Ma'aikata:** Bayan shigarwa da gwadawa, dole ne ma'aikatan da aka horar da su kawai su yi amfani da injinan.

## 10. Bayanan Aiki & Tsaro (Cire daga Littafin Mai Amfani)

An ciro shi daga littafin jagorar aiki na Ooitech Laminator (Model A2236 kuma yana aiki ga duk samfuran cikakken atomatik).

### 10.1 Jagorar Alama

| Alama | Ma'ana / Gargadi |
| --- | --- |
| ⚠ Yi Hattara | Hadarin buguwa ko tuntuɓe a wannan yanki. Kula da lafiyar gaɓoɓi da jiki. |
| ???? Zafi Mai Girma | Zazzabin teburin aiki na iya kaiwa 180°C yayin aiki da bayan aiki. Tabbatar cewa zazzabi ya kasance cikin aminci kafin taɓawa. KADA a sassauta haɗin bututun mai ko flanges yayin aiki ko bayan aiki yayin da mai ke da zafi. KADA a cire garkuwar akwatin dumama ba bisa ka'ida ba. |
| ✋ Kalli Hannunka | Hadarin faɗuwar murfin akwatin sama. Tabbatar cewa babu wani ma'aikaci a yankin aiki yayin da injin ke aiki ko ana gyara shi. |
| ⚙ Rauni na Injiniya | Sarƙoƙi da bel na jigilar kaya na iya haifar da kama. Duk ma'aikata a yankin samarwa dole ne su sanya tufafin aiki da hular aiki. Dole ne a saka dogon gashi gabaɗaya a cikin hular. |
| ⚡ Girgizar Wutar Lantarki | Akwatin rarraba wutar lantarki da aka shigar a yankin kayan aiki. Tuntuɓi ma'aikacin lantarki mai kula da gyara don kowane aiki na lantarki. |

### 10.2 Muhimman Tsare-tsare na Aiki

1. Kada a yi amfani da wannan samfurin a cikin iskar gas mai lalata, danshi, wuta, ko mahalli masu fashewa.
2. Tabbatar cewa na'urar tana da ingantaccen ƙasa kafin aiki.
3. Kada a buɗe murfin kariya na tasha lokacin da na'urar ke kunne ko tana aiki.
4. Kada a taɓa allon kewayawa da hannu tsirara — haɗarin girgiza wutar lantarki da lalacewar ESD.
5. Masu aiki dole ne su sanya safofin hannu masu rufe wutar lantarki yayin sanya ko cire kayan haɗin da aka haɗa da hannu.
6. Ma'aikatan kulawa dole ne su kashe wutar na'urar kafin kulawa. Tabbatar babu haɗari kafin haɗa wayoyi, dubawa, ko motsi na'urar.
7. Lokacin kunna ko rufe na'urar, nisantar da hannu daga babban na'urar. A cikin gaggawa, danna maɓallin dakatar da gaggawa nan take.
8. Yayin motsi na bel/sarkar, waɗanda ba masu aiki ba dole ne su bar yankin. Masu aiki ba dole ne su sanya hannu ko sassan jiki kusa da ko cikin bel ɗin jigilar kaya.
9. Lokacin da injin ke aiki, duk waɗanda ba ma'aikata ba dole ne su tsaya aƙalla mita 1 daga injin.
10. Ba a yarda baƙi da waɗanda ba ƙwararru ba su sarrafa wannan injin.
11. Bututun vacuum tsakanin famfon vacuum da laminator bai kamata ya wuce mita 12 ba — nisa mai tsayi yana rage aikin vacuum.
12. Lokacin kashe famfon vacuum, fara hura duka ɗakuna zuwa matsin yanayi. Kada a taɓa buɗe murfin yayin da ɗakin ƙasa yana ƙarƙashin matsin mara kyau.
13. Bada famfon mai ya yi aiki a cikin zagayawa na yau da kullun na aƙalla mintuna 3 kafin kunna dumama. Lokacin kashewa: fara kashe dumama, sannan kashe famfon mai. Kada a taɓa kashe famfon mai mai zafi yayin da zafin jiki ya wuce 100°C.
14. Lokacin da injin ba ya aiki sosai, buɗe murfin don ba da damar zafi ya watse bayan kashe dumama.
15. Kashe babban wutar lantarki bayan aikin laminator ya ƙare, don guje wa tsangwama ga kayan aikin da ke da alaƙa.
16. Kada a zame ko sanya abubuwa masu kaifi (misali wuƙaƙe) a saman bel ɗin jigilar kaya — wannan zai rage tsawon rayuwar bel.
17. Na'urar laminator ta atomatik tana da kayan lantarki masu inganci. Kada a sake sanya ko tura wani kayan lantarki ba tare da izini ba — hakan na iya haifar da matsala.
18. Kada a sanya wani abu na waje a saman dandalin dumama — murfin yana matsa lamba mai yawa yayin aiki.
19. Kafin bude murfin, a tabbatar an cika ƙaramin ɗaki da iska.
20. Maɓallin dakatar da gaggawa yana kashe duk na'urar. Sake saita ta ta hanyar juya maɓallin a hanyar da kibiya ta nuna bayan an gyara matsala.

### 10.3 Fassarar Lambar Samfur (daga Littafin Mai Amfani)

| Lambar | Ma'ana | Misali |
| --- | --- | --- |
| H | Semi-automatic | OCY-H600D → Semi-auto, 600 mm, Electric |
| A | Daki guda | OTCY-A2658 → Gida ɗaya |
| S | Daki biyu | OTCY-S2658 → Gida biyu |
| T | Daki uku | OTCY-T2787 → Gida uku |
| B | Biyu Layer | OTCY-BT2787 → Biyu Layer, Gida uku |
| D (suffix) | Dumama lantarki | OCY-H600D → Electric; 2787DD → Double Layer Double Chamber |
| Sashin lamba | Ingantaccen yanki na laminating (ma'auni da aka taƙaita) | 2787 → ~2700×8700 mm yanki |

## Abubuwan da ke da alaƙa

![SC-10C Cikakken Atomatik Silicon Wafer Laser Yanke](https://cdn.ooitech.com/static/upload/image/20260324/1774340166130021.webp)

#### SC-10C Cikakken Atomatik Silicon Wafer Laser Yanke

![Injin Haɗa Layout & Bussing Ta Atomati](https://cdn.ooitech.com/static/upload/image/20260324/1774346811981523.webp)

#### Injin Haɗa Layout & Bussing Ta Atomati

![SC-20D Na'urar Yankan Ƙwayoyin Hasken Rana mai Laser Biyu](https://cdn.ooitech.com/static/upload/image/20260319/1773917787610971.webp)

#### SC-20D Na'urar Yankan Ƙwayoyin Hasken Rana mai Laser Biyu

![Na'urar Laminator BIPV Mai Dakuna Biyu Mai Layer Daya](https://cdn.ooitech.com/static/upload/image/20260325/1774438506273987.webp)

#### Na'urar Laminator BIPV Mai Dakuna Biyu Mai Layer Daya

![OTMT-A Sun Simulator: Class A, ≤±1% Rashin Kwanciyar Hankali](https://cdn.ooitech.com/static/upload/image/20260326/1774513832212306.jpg)

#### OTMT-A Sun Simulator: Class A, ≤±1% Rashin Kwanciyar Hankali

![OTCT-A Mai Gwajin Tantanin Rana: IEC 60904-9, Daraja A](https://cdn.ooitech.com/static/upload/image/20260327/2026032746397289.webp)

#### OTCT-A Mai Gwajin Tantanin Rana: IEC 60904-9, Daraja A

![Injin Yanke Laser na Tantaniyar Rana — OLS-20E Dual Laser](https://cdn.ooitech.com/static/upload/image/20260318/2026031858869524.webp)

#### Injin Yanke Laser na Tantaniyar Rana — OLS-20E Dual Laser

![C350-CQC Injin Yanke Tiren EVA & TPT: 30-80mm](https://cdn.ooitech.com/static/upload/image/20260327/2026032714363679.webp)

#### C350-CQC Injin Yanke Tiren EVA & TPT: 30-80mm

![](/template/ooitech/assets/img/shape/06.png)

![](https://cdn.ooitech.com/runtime/image/w800_h700_fitblur_v2_w800_h700_fitblur_v2_1757399770541443.webp)

### Nemi Farashi

Duk abubuwan da aka ɗora suna da tsaro kuma sirri ne.

## Muna isar da gwanintar da za ka iya amincewa sabis ɗinmu

Kayan aiki kai tsaye daga masana'anta.

![](/template/ooitech/assets/img/icon/money-2.svg)

### Fa'idodin Rage Kuɗi

Muna ba da ƙima ta musamman, muna haɓaka sakamako yayin da muke rage kasafin kuɗi ga abokan ciniki.

![](/template/ooitech/assets/img/icon/staff.svg)

### Ƙungiyar Ƙwarewarmu

Kwararrun ma'aikatanmu sun ƙware a sababbin hanyoyin magance matsaloli da dabarun da aka keɓance.

![](/template/ooitech/assets/img/icon/certified.svg)

### Fiye da Shekaru 15 na Ƙwarewar Masana'antu

Ƙwarewa mai zurfi tana tabbatar da sakamako masu dogaro, masu bin zamani, da tabbatattu don nasara.

![](https://cdn.ooitech.com/static/upload/image/20250910/1757477357667605.webp)

![](https://cdn.ooitech.com/static/upload/image/20250910/1757477724911512.webp)

![](/template/ooitech/assets/img/shape/06.png)

## Abin da Abokin Cinikinmu Ya ce game da mu

Shaidun abokan ciniki sun yaba da zurfin fahimtarmu game da ƙalubalen su, wanda ke haifar da sababbin hanyoyin magance matsaloli da riba mai ƙarfi. Haɗin gwiwa na dogon lokaci—wasu fiye da shekaru goma—suna nuna amincewarsu da gamsuwa. Labaran nasarar su suna motsa mu don ci gaba da wuce tsammanin su. [Ƙara Sani **](#quote-form)

![](/template/ooitech/assets/img/icon/quote.svg)

Mutum mai babban rai. Na gode sosai da ziyarar ku Mista Wu. Na gode sosai da ayyukan da aka bayar wajen shigar da kayan aiki da horar da dalibai na. Mutum mafi kirki kuma ƙwararre a fanninsa.

![Jizzakh Polytechnic Institute](https://cdn.ooitech.com/runtime/image/w160_h160_fitblur_v2_2026041716444445.webp)

### Jizzakh Polytechnic Institute

![](/template/ooitech/assets/img/icon/quote.svg)

Na sake godewa sosai don babban taimako na inganta da gyara masana'anta da kuma koya wa ma'aikata yadda ake amfani da injinan

![Mark](https://cdn.ooitech.com/runtime/image/w160_h160_fitblur_v2_1757479675272137.webp)

### Mark

BIPV Philippines

![](/template/ooitech/assets/img/icon/quote.svg)

na gode da goyon bayan ƙwararrun ooitech da sabis na bayan lokaci.

![Diarra Daga Afirka](https://cdn.ooitech.com/runtime/image/w160_h160_fitblur_v2_1784509010217979.webp)

### Diarra Daga Afirka

![](/template/ooitech/assets/img/icon/quote.svg)

Godiya ga Ooitech don samar da kayan aikin gwajin ƙwayar hasken rana na BC da suka dace sosai.

![KTECH](https://cdn.ooitech.com/runtime/image/w160_h160_fitblur_v2_1776426122864564.webp)

### KTECH

![](/template/ooitech/assets/img/icon/quote.svg)

Godiya ga Ooitech don samar da kayan aikin samarwa na atomatik cikakke—shigar da ku da sabis na bayan siyarwa sun yi kyau sosai.

![Amjad](https://cdn.ooitech.com/runtime/image/w160_h160_fitblur_v2_2026041720921238.webp)

### Amjad

## Sabbin Labaran Mu & Blog

![Tsarin Samar da Ƙwayoyin Hasken Rana na TOPCon: Mataki-mataki](https://cdn.ooitech.com/runtime/image/w320_h200_fitblur_v2_3fffaa885dcfbafc7d41439c979f3e14.webp)

- [** ooitech](./topcon-solar-cell-manufacturing-process-a-complete-step-by-step-guide.html)
- [** 2499](./topcon-solar-cell-manufacturing-process-a-complete-step-by-step-guide.html)

### Tsarin Samar da Ƙwayoyin Hasken Rana na TOPCon: Mataki-mataki

Tsarin samar da ƙwayoyin hasken rana na TOPCon, mataki-mataki: yin rubutu, yaɗuwar boron, oxide na tunnel da ajiyar polysilicon, sanya ƙarfe da gwaji.

![Cosmic Solar Ya Sayi Hasken Rana Mai Rabin Atomatik na 5MW](https://cdn.ooitech.com/runtime/image/w320_h200_fitblur_v2_2026041511844574.webp)

- [** ooitech](./cosmic-solar-purchases-5mw-semi-automatic-solar-panel-production-line-from-ooitech-in-2014.html)
- [** 1681](./cosmic-solar-purchases-5mw-semi-automatic-solar-panel-production-line-from-ooitech-in-2014.html)

### Cosmic Solar Ya Sayi Hasken Rana Mai Rabin Atomatik na 5MW

A cikin 2014, kamfanin Indiya Cosmic Solar ya sayi layin samar da hasken rana mai rabin atomatik na 5MW daga Ooitech, wanda ke nuna muhimmin ci gaba a Ooitech

![Layin Samar da Hasken Rana na BIPV na 30MW](https://cdn.ooitech.com/runtime/image/w320_h200_fitblur_v2_2026041451376657.webp)

- [** ooitech](./30mw-bipv-solar-panel-production-line-in-philippines-powered-by-ooitech.html)
- [** 1680](./30mw-bipv-solar-panel-production-line-in-philippines-powered-by-ooitech.html)

### Layin Samar da Hasken Rana na BIPV na 30MW

Ooitech ya isar da cikakken layin samar da hasken rana na BIPV na 30MW zuwa Philippines, wanda ke ba da damar samar da gida a cikin gida na photovoltaic da aka haɗa da gini

![Mai Ƙera Injin Tabber Stringer: Yadda za a Tantance Ɗaya](https://cdn.ooitech.com/runtime/image/w320_h200_fitblur_v2_2026061020186378.webp)

- [** ooitech](./how-a-tabber-and-stringer-works-and-how-to-choose-one-in-2026.html)
- [** 1464](./how-a-tabber-and-stringer-works-and-how-to-choose-one-in-2026.html)

### Mai Ƙera Injin Tabber Stringer: Yadda za a Tantance Ɗaya

Yadda za a gane ainihin masana'antar injin tabber stringer daga kamfanin kasuwanci, abin da gwajin karba dole ya tabbatar, da alamun ja-gora na farashi.

![Ooitech ya isar da layukan samar da hasken rana guda huɗu a Masar tun 2014. Abin da masu siye na Masar suke tambaya, da yawan sarari da kowane ƙarfin ke buƙata.](https://cdn.ooitech.com/runtime/image/w320_h200_fitblur_v2_2026041439202098.webp)

- [** ooitech](./egypt-first-full-automatic-solar-panel-production-line-from-china-ooitech-success-story.html)
- [** 1444](./egypt-first-full-automatic-solar-panel-production-line-from-china-ooitech-success-story.html)

### Ooitech ya isar da layukan samar da hasken rana guda huɗu a Masar tun 2014. Abin da masu siye na Masar suke tambaya, da yawan sarari da kowane ƙarfin ke buƙata.

Ooitech has delivered four solar panel production lines in Egypt since 2014. What Egyptian buyers ask, and how much space each capacity needs.

![Kamfanin American Green Energy ya Sayi Ooitech](https://cdn.ooitech.com/runtime/image/w320_h200_fitblur_v2_2026032780265832.webp)

- [** ooitech](./american-green-energy-company-purchases-ooitech-automatic-ribbon-cutting-machine-in-2014.html)
- [** 1360](./american-green-energy-company-purchases-ooitech-automatic-ribbon-cutting-machine-in-2014.html)

### Kamfanin American Green Energy ya Sayi Ooitech

A cikin 2014, wani kamfanin makamashi mai tsafta daga Amurka ya sayi injin yankan da lankwasa ribbon na atomatik na Ooitech don samar da panel ɗin hasken rana

![Tantanin Rana na GaAs mai Haɗin Uku — Tsari da Ribobi](https://cdn.ooitech.com/runtime/image/w320_h200_fitblur_v2_0faa5b779818653a93da98562535c954.png)

- [** ooitech](./triple-junction-gaas-solar-cells-a-detailed-look-at-the-mainstream-space-photovoltaic-structure.html)
- [** 1327](./triple-junction-gaas-solar-cells-a-detailed-look-at-the-mainstream-space-photovoltaic-structure.html)

### Tantanin Rana na GaAs mai Haɗin Uku — Tsari da Ribobi

Tantanin rana na GaAs mai haɗin uku: yadda haɗin uku da aka jera ke raba bakan, me ya sa inganci ke wuce 30%, da inda farashi ke iyakance amfani da mai tattara haske.

![SUNUSA ta Yi Oda na Samar da Panel Hasken Rana na Semi-Automatic na 5MW](https://cdn.ooitech.com/runtime/image/w320_h200_fitblur_v2_2026041512063502.webp)

- [** ooitech](./sunusa-orders-5mw-semi-automatic-solar-panel-production-line-from-ooitech-in-2014.html)
- [** 1219](./sunusa-orders-5mw-semi-automatic-solar-panel-production-line-from-ooitech-in-2014.html)

### SUNUSA ta Yi Oda na Samar da Panel Hasken Rana na Semi-Automatic na 5MW

A cikin 2014, wani kamfanin kera hasken rana na Indiya SUNUSA ya sayi layin samar da panel hasken rana na semi-automatic na 5MW daga Ooitech don faɗaɗa rukunin hasken rana na cikin gida